[Milsurplus] Bendix TA-12C, Need Info

[Mike Hanz]

Hi Jim,

Jim Hill wrote:
> The front panel seems to be secured to the case with suitcase 
> fasteners.  However, after loosening them, the nothing budges.  Some 
> gentle tapping on the edge with a screwdriver and hammer in the 
> deceased's garage didn't help.  Should any screws be removed?
>   

Nope.  Just needs a film of aluminum corrosion broken free.  A wood shim 
and a dead blow hammer work well.
> Any suggestions regarding a manual or even a 
> schematic?  http://www.vk2bv.org/museum/ta12.htm  has useful 
> information on his web site, but the schematic resolution leaves a 
> lot to be desired and there is no parts list or test voltages.  I'm 
> happy to pay for any repro charges, or could borrow the manual and 
> scan it using my new scanner and put it on BAMA.

I have the TA-12B system schematics at 
http://aafradio.org/docs/docs.html.  I haven't had time to get the 
component value pages scanned, but it should get you started.

    73,
  - Mike  KC4TOS