[Milsurplus] OT: Black Mold on manuals

[gl4d21a at juno.com]

John:

The tradeoff is between making the mold lighter and not impacting the 
print.  Start with a very mild solution of Clorox in a well 
ventilated area, applying with a Q-tip or artist brush.  I don't 
think you want to soak the whole page, but it depends on how badly 
the material is contaminated.  If you have access to a very high 
intensity UV source, that might also work, but protect your eyes 
there.  Remember the Clorox will also weaken the paper, so try to 
keep the area being cleaned as small as possible.  Stronger solutions 
will work faster, but also will be more difficult to control.  Wash 
with plain water, dry between absorbent material like well used cloth 
diapers, and copy.  Good luck!

HTH 
George
W5VPQ


________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!