[Milsurplus] Need Converter for PRC-47--- 110VAC,60cycles to 110VAC 400cycles

Tue, 7 Oct 2003 23:41:23 EDT

In a message dated 10/7/03 8:15:00 PM, [email protected] writes:

> Anyone have a simple fix for this one.=A0 I want to skirt around using a b=
ig=20
> and heavy 24VDC power supply.=A0 Any ideas.=A0 Andy, K6RY
>=20
>=20

Andy,

How about a 115vac, 400cps MG set.   Drive motor 115/230 vac @ 60 Hz.   This=
=20
is an ex. Navy unit weighing in at about 125 lbs.   Was working but lost=20
output suddenly.   All field and commutator circuits check out OK so somethi=
ng must=20
have come loose.   Didn't pursue the problem further because I had a second=20
operating unit which I use with my PRC-47.=20

Haul it away and it's yours -- free!

Dennis D.   W7QHO
Glendale, CA

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---