[Lowfer] Basic Argo settings?

[STEVE MCDONALD]

Frank ..
 I can see it was a thread on the Lowfer forum from Feb 2003. All of their stuff is archived and the complete thread is here. Look for the ‘rx setup’ thread.

http://mailman.qth.net/pipermail/lowfer/2003-February/thread.html

There’s likely a lot of other Argo info there as well but would require searching. I found the quickest way to learn about Argo was to just play with it on HF and see what it does! I love its simplicity and reliable performance but don’t use it much anymore now that QRSS modes are rarely seen on LF.

Steve

----- Original Message -----
From: Steve Ratzlaff <ratzlaffsteve at gmail.com>
To: STEVE MCDONALD <ve7sl at shaw.ca>
Sent: Sat, 11 Sep 2021 12:05:43 -0600 (MDT)
Subject: Re: [Lowfer] Basic Argo settings?

And too bad you have to have a paid subscription to see the whole file 
there.   :(        I guess you're a paid member; I'm not.

73,

Steve

On 9/11/2021 11:02 AM, STEVE MCDONALD wrote:
> Frank you may find something helpful here:
>
> https://www.scribd.com/document/205707180/Argo-
----- Original Message -----
From: Frank O'Donnell <lfr at inkbox.net>
To: LowFER (US European <lowfer at mailman.qth.net>
Sent: Sat, 11 Sep 2021 12:26:25 -0600 (MDT)
Subject: Re: [Lowfer] Basic Argo settings?

Thanks, Steve.

Is there any way to get that document without giving a credit card 
number to scribd.com for a "30-day free trial" account?

On 9/11/21 11:02 AM, STEVE MCDONALD wrote:
> Frank you may find something helpful here:
>
> https://www.scribd.com/document/205707180/Argo-Tuning
>
> ----- Original Message -----
> From: Frank O'Donnell <lfr at inkbox.net>
> To: LowFER (US European <lowfer at mailman.qth.net>
> Sent: Sat, 11 Sep 2021 11:50:40 -0600 (MDT)
> Subject: [Lowfer] Basic Argo settings?
>
> Hi, total LowFER and Argo newbie here.
>
> I'm interested in setting up a receiver using an SDR controlled by SDR
> Console software, virtual audio cable, and a copy of Argo v1 build 149a
> newly downloaded from weaksignals.com. I've set SDR Console to 185.3 kHz
> in CW mode with a 1 kHz bandwidth. In Argo, I've filled in my callsign
> and grid, and set the soundcard input to the virtual audio cable that
> the SDR outputs to.
>
> Anything else I need to configure? I see Argo defaults to QRSS 3 -- any
> tweaks to that and/or frequency desirable?
>
> I'd seen a post to the effect that a basic user guide comes with Argo,
> but I haven't been able to find it.
>
> Thanks much,
>
> Frank K6FOD
> DM04wc
> Southern California
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-- 
WEB - "The VE7SL Radio Notebook": http://qsl.net/ve7sl/

VE7SL BLOG - "Homebrewing and Operating Adventures From 2200m to Nanowaves": 
http://ve7sl.blogspot.ca/