[Lowfer] Basic Argo settings?

[Frank O'Donnell]

Thanks, Steve.

Is there any way to get that document without giving a credit card 
number to scribd.com for a "30-day free trial" account?

On 9/11/21 11:02 AM, STEVE MCDONALD wrote:
> Frank you may find something helpful here:
>
> https://www.scribd.com/document/205707180/Argo-Tuning
>
> ----- Original Message -----
> From: Frank O'Donnell <lfr at inkbox.net>
> To: LowFER (US European <lowfer at mailman.qth.net>
> Sent: Sat, 11 Sep 2021 11:50:40 -0600 (MDT)
> Subject: [Lowfer] Basic Argo settings?
>
> Hi, total LowFER and Argo newbie here.
>
> I'm interested in setting up a receiver using an SDR controlled by SDR
> Console software, virtual audio cable, and a copy of Argo v1 build 149a
> newly downloaded from weaksignals.com. I've set SDR Console to 185.3 kHz
> in CW mode with a 1 kHz bandwidth. In Argo, I've filled in my callsign
> and grid, and set the soundcard input to the virtual audio cable that
> the SDR outputs to.
>
> Anything else I need to configure? I see Argo defaults to QRSS 3 -- any
> tweaks to that and/or frequency desirable?
>
> I'd seen a post to the effect that a basic user guide comes with Argo,
> but I haven't been able to find it.
>
> Thanks much,
>
> Frank K6FOD
> DM04wc
> Southern California
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>