[Lowfer] Basic Argo settings?

[Frank O'Donnell]

Thanks, Steve, found the thread in the archive. Will see how it works 
out tonight,

On 9/11/21 11:31 AM, STEVE MCDONALD wrote:
> Frank ..
>   I can see it was a thread on the Lowfer forum from Feb 2003. All of their stuff is archived and the complete thread is here. Look for the ‘rx setup’ thread.
>
> http://mailman.qth.net/pipermail/lowfer/2003-February/thread.html
>
> There’s likely a lot of other Argo info there as well but would require searching. I found the quickest way to learn about Argo was to just play with it on HF and see what it does! I love its simplicity and reliable performance but don’t use it much anymore now that QRSS modes are rarely seen on LF.
>
> Steve
>
> ----- Original Message -----
> From: Steve Ratzlaff <ratzlaffsteve at gmail.com>
> To: STEVE MCDONALD <ve7sl at shaw.ca>
> Sent: Sat, 11 Sep 2021 12:05:43 -0600 (MDT)
> Subject: Re: [Lowfer] Basic Argo settings?
>
> And too bad you have to have a paid subscription to see the whole file
> there.   :(        I guess you're a paid member; I'm not.
>
> 73,
>
> Steve
>
> On 9/11/2021 11:02 AM, STEVE MCDONALD wrote:
>> Frank you may find something helpful here:
>>
>> https://www.scribd.com/document/205707180/Argo-
> ----- Original Message -----
> From: Frank O'Donnell <lfr at inkbox.net>
> To: LowFER (US European <lowfer at mailman.qth.net>
> Sent: Sat, 11 Sep 2021 12:26:25 -0600 (MDT)
> Subject: Re: [Lowfer] Basic Argo settings?
>
> Thanks, Steve.
>
> Is there any way to get that document without giving a credit card
> number to scribd.com for a "30-day free trial" account?
>
> On 9/11/21 11:02 AM, STEVE MCDONALD wrote:
>> Frank you may find something helpful here:
>>
>> https://www.scribd.com/document/205707180/Argo-Tuning
>>
>> ----- Original Message -----
>> From: Frank O'Donnell <lfr at inkbox.net>
>> To: LowFER (US European <lowfer at mailman.qth.net>
>> Sent: Sat, 11 Sep 2021 11:50:40 -0600 (MDT)
>> Subject: [Lowfer] Basic Argo settings?
>>
>> Hi, total LowFER and Argo newbie here.
>>
>> I'm interested in setting up a receiver using an SDR controlled by SDR
>> Console software, virtual audio cable, and a copy of Argo v1 build 149a
>> newly downloaded from weaksignals.com. I've set SDR Console to 185.3 kHz
>> in CW mode with a 1 kHz bandwidth. In Argo, I've filled in my callsign
>> and grid, and set the soundcard input to the virtual audio cable that
>> the SDR outputs to.
>>
>> Anything else I need to configure? I see Argo defaults to QRSS 3 -- any
>> tweaks to that and/or frequency desirable?
>>
>> I'd seen a post to the effect that a basic user guide comes with Argo,
>> but I haven't been able to find it.
>>
>> Thanks much,
>>
>> Frank K6FOD
>> DM04wc
>> Southern California
>>
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>