[Lowfer] Lowfers

[Michael Sapp]

Mitch: Tnx, I mostly "Rob & Duplicate" (R&D), meaning that I stumble across 
stuff  of interest that looks useful and then
try to apply it --- with varying degrees of success. That said, info is 
better shared than sat on....

Guys like Jim Fisk (sk), Wes Hayward, and a few on this list are the really 
brilliant engineers and communicators
in this hobby.... I'm just a lowly scribe trying to figure out how much I 
don't know....

73 Mike wa3tts


----- Original Message ----- 
From: "Mitch Powell" <ve3ot.mp at gmail.com>
To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Wednesday, October 14, 2015 2:49 PM
Subject: Re: [Lowfer] Lowfers


> That's pretty good Mike -  10-15 wpm - is a nice speed for a QSO.
> I'm collecting your articles on noise suppression and circuit mods - makes
> for great
> reading, and good suggestions for the problems that I encounter.
> Thanks
> 73
> Mitch
>
> On Tue, Oct 13, 2015 at 10:47 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>
>> Mitch, for what it is worth I hear your CW IDs on a regular basis down
>> here in EN90xn....73, Mike tts
>>
>>
>>
>> ----- Original Message ----- From: "Mitch Powell" <ve3ot.mp at gmail.com>
>> To: "Garry Carson" <k3siw at sbcglobal.net>; "Discussion of the Lowfer (US,
>> European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
>> Sent: Tuesday, October 13, 2015 10:40 PM
>> Subject: Re: [Lowfer] Lowfers
>>
>>
>>
>> Hi Garry: All measurements solid here - so not sure what happened 
>> earlier.
>>> Here is a copy of the reason for QRSS3.
>>> Thanks for the report - nice to see it that clearly.
>>>
>>> quote"Good day John, Garry and JD - Not much of a chance of slipping in 
>>> a
>>> change on you.
>>>
>>> Had presented a talk on LF at the local Radio Club on Thursday/Oct8 - 
>>> and
>>> had switched over to full ID at QRSS3, before I left for the meeting. 
>>> It
>>> was obviously noted pretty quickly - congratulations. Talked about
>>> software
>>> of course, and QRSS operation - so set up this speed with ID to provide
>>> the
>>> display you have received.
>>>
>>> I thought that if I could get them listening down at 137, hearing QRSS3
>>> directly, that they could then install software, and start listening on 
>>> or
>>> about 500 kHz with additional modes that are available there on a more
>>> regular basis.
>>> NDBs were covered for further listening tests by the novice.
>>>
>>> I hope it works, and generates some LF interest and possible activity in
>>> the area.
>>> Good crowd of 50, so the odds are that one or more should hop on the
>>> bandwagon.
>>>
>>> Returning to QRSS60 tonight - but interesting to see the effect QRSS3, 
>>> as
>>> noted.
>>>
>>> Thanks all for reports.
>>>
>>> Mitch
>>>
>>> On Tue, Oct 13, 2015 at 12:18 PM, Garry Hess <k3siw at sbcglobal.net> 
>>> wrote:
>>>
>>> J.B., don't know why Mitch was sending "VE3OT" via QRSS3 for a few days,
>>>> but he's back on the air now with "MP", QRSS60 as before.
>>>>
>>>> --
>>>> 73, Garry, K3SIW, EN52ta, Elgin, IL
>>>>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html