[Lowfer] Lowfers

[Mitch Powell]

Nice stuff
thanks an

On Wed, Oct 14, 2015 at 3:51 PM, Michael Sapp <wa3tts at verizon.net> wrote:

> Mitch: Tnx, I mostly "Rob & Duplicate" (R&D), meaning that I stumble
> across stuff  of interest that looks useful and then
> try to apply it --- with varying degrees of success. That said, info is
> better shared than sat on....
>
> Guys like Jim Fisk (sk), Wes Hayward, and a few on this list are the
> really brilliant engineers and communicators
> in this hobby.... I'm just a lowly scribe trying to figure out how much I
> don't know....
>
> 73 Mike wa3tts
>
>
> ----- Original Message ----- From: "Mitch Powell" <ve3ot.mp at gmail.com>
> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <
> lowfer at mailman.qth.net>
> Sent: Wednesday, October 14, 2015 2:49 PM
>
> Subject: Re: [Lowfer] Lowfers
>
>
> That's pretty good Mike -  10-15 wpm - is a nice speed for a QSO.
>> I'm collecting your articles on noise suppression and circuit mods - makes
>> for great
>> reading, and good suggestions for the problems that I encounter.
>> Thanks
>> 73
>> Mitch
>>
>> On Tue, Oct 13, 2015 at 10:47 PM, Michael Sapp <wa3tts at verizon.net>
>> wrote:
>>
>> Mitch, for what it is worth I hear your CW IDs on a regular basis down
>>> here in EN90xn....73, Mike tts
>>>
>>>
>>>
>>> ----- Original Message ----- From: "Mitch Powell" <ve3ot.mp at gmail.com>
>>> To: "Garry Carson" <k3siw at sbcglobal.net>; "Discussion of the Lowfer (US,
>>> European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
>>> Sent: Tuesday, October 13, 2015 10:40 PM
>>> Subject: Re: [Lowfer] Lowfers
>>>
>>>
>>>
>>> Hi Garry: All measurements solid here - so not sure what happened
>>> earlier.
>>>
>>>> Here is a copy of the reason for QRSS3.
>>>> Thanks for the report - nice to see it that clearly.
>>>>
>>>> quote"Good day John, Garry and JD - Not much of a chance of slipping in
>>>> a
>>>> change on you.
>>>>
>>>> Had presented a talk on LF at the local Radio Club on Thursday/Oct8 -
>>>> and
>>>> had switched over to full ID at QRSS3, before I left for the meeting. It
>>>> was obviously noted pretty quickly - congratulations. Talked about
>>>> software
>>>> of course, and QRSS operation - so set up this speed with ID to provide
>>>> the
>>>> display you have received.
>>>>
>>>> I thought that if I could get them listening down at 137, hearing QRSS3
>>>> directly, that they could then install software, and start listening on
>>>> or
>>>> about 500 kHz with additional modes that are available there on a more
>>>> regular basis.
>>>> NDBs were covered for further listening tests by the novice.
>>>>
>>>> I hope it works, and generates some LF interest and possible activity in
>>>> the area.
>>>> Good crowd of 50, so the odds are that one or more should hop on the
>>>> bandwagon.
>>>>
>>>> Returning to QRSS60 tonight - but interesting to see the effect QRSS3,
>>>> as
>>>> noted.
>>>>
>>>> Thanks all for reports.
>>>>
>>>> Mitch
>>>>
>>>> On Tue, Oct 13, 2015 at 12:18 PM, Garry Hess <k3siw at sbcglobal.net>
>>>> wrote:
>>>>
>>>> J.B., don't know why Mitch was sending "VE3OT" via QRSS3 for a few days,
>>>>
>>>>> but he's back on the air now with "MP", QRSS60 as before.
>>>>>
>>>>> --
>>>>> 73, Garry, K3SIW, EN52ta, Elgin, IL
>>>>>
>>>>> ______________________________________________________________
>>>>> Lowfer mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>> ______________________________________________________________
>>>>>
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>