[Lowfer] Lowfers

[Mitch Powell]

That's pretty good Mike -  10-15 wpm - is a nice speed for a QSO.
I'm collecting your articles on noise suppression and circuit mods - makes
for great
reading, and good suggestions for the problems that I encounter.
Thanks
73
Mitch

On Tue, Oct 13, 2015 at 10:47 PM, Michael Sapp <wa3tts at verizon.net> wrote:

> Mitch, for what it is worth I hear your CW IDs on a regular basis down
> here in EN90xn....73, Mike tts
>
>
>
> ----- Original Message ----- From: "Mitch Powell" <ve3ot.mp at gmail.com>
> To: "Garry Carson" <k3siw at sbcglobal.net>; "Discussion of the Lowfer (US,
> European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
> Sent: Tuesday, October 13, 2015 10:40 PM
> Subject: Re: [Lowfer] Lowfers
>
>
>
> Hi Garry: All measurements solid here - so not sure what happened earlier.
>> Here is a copy of the reason for QRSS3.
>> Thanks for the report - nice to see it that clearly.
>>
>> quote"Good day John, Garry and JD - Not much of a chance of slipping in a
>> change on you.
>>
>> Had presented a talk on LF at the local Radio Club on Thursday/Oct8 - and
>> had switched over to full ID at QRSS3, before I left for the meeting.  It
>> was obviously noted pretty quickly - congratulations. Talked about
>> software
>> of course, and QRSS operation - so set up this speed with ID to provide
>> the
>> display you have received.
>>
>> I thought that if I could get them listening down at 137, hearing QRSS3
>> directly, that they could then install software, and start listening on or
>> about 500 kHz with additional modes that are available there on a more
>> regular basis.
>> NDBs were covered for further listening tests by the novice.
>>
>> I hope it works, and generates some LF interest and possible activity in
>> the area.
>> Good crowd of 50, so the odds are that one or more should hop on the
>> bandwagon.
>>
>> Returning to QRSS60 tonight - but interesting to see the effect QRSS3, as
>> noted.
>>
>> Thanks all for reports.
>>
>> Mitch
>>
>> On Tue, Oct 13, 2015 at 12:18 PM, Garry Hess <k3siw at sbcglobal.net> wrote:
>>
>> J.B., don't know why Mitch was sending "VE3OT" via QRSS3 for a few days,
>>> but he's back on the air now with "MP", QRSS60 as before.
>>>
>>> --
>>> 73, Garry, K3SIW, EN52ta, Elgin, IL
>>>
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>