[Lowfer] Lowfer capture

[jrusgrove at comcast.net]

Mike

What size is the loop conductor?

Jay W1VD  WD2XNS  WE2XGR/2




----- Original Message ----- 
From: "N8OOU" <n8oou at meekfarm.us>
To: "Andy - KU4XR via Lowfer" <lowfer at mailman.qth.net>
Sent: Sunday, November 16, 2014 1:28 PM
Subject: [Lowfer] Lowfer capture


> Andy,  Mike Meek here, N8OOU. I looked at the capture you just posted an 
> am not sure I understand the time stamps.
> 
> I have been conducting on air tests of the Wm beacon on 185.300x. That 
> is the Bill Ashlock machine. I am currently using a 50 Ft diameter loop 
> and trying to get it resonant at that freq. At about 7pm cst last night 
> I finally got some current flowing in the loop, and I let it run over 
> night until about 9am CST this morning.
> 
> In the capture you posted I don't see my signal, but I'm not sure if it 
> covered my up-time. Could you confirm that for me?
> 
> I also don't know if a 50 Ft loop is enough wire in the sky, of if I 
> even have enough "fire in the wire" to reach you.  I'm at the beginning 
> in the lowfer transmitting curve.
> 
> Do you have captures in that timeframe and if so could you take a look 
> for my signal?
> 
> Thanks
> -- 
> 73   de   N8OOU - Mike Meek
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html