[Lowfer] Lowfer capture

[Andy - KU4XR via Lowfer]

Hi Mike: nice to hear from you... Good luck getting " WM " up and running..
I have all of last nights captures on my radio computer at home ( at work now ),
I'll go thru them again... The time ticks at the bottom of the capture is my
local time, covering from 10 pm EST to 12:30 am EST.. The time in the
upper left caption is the UTC time stamp..

73 for now :

Andy - KU4XR
--------------------------------------------
On Sun, 11/16/14, N8OOU <n8oou at meekfarm.us> wrote:

 Subject: [Lowfer] Lowfer capture
 To: "Andy - KU4XR via Lowfer" <lowfer at mailman.qth.net>
 Date: Sunday, November 16, 2014, 1:28 PM
 
 Andy,  Mike Meek here, N8OOU. I
 looked at the capture you just posted an 
 am not sure I understand the time stamps.
 
 I have been conducting on air tests of the Wm beacon on
 185.300x. That 
 is the Bill Ashlock machine. I am currently using a 50 Ft
 diameter loop 
 and trying to get it resonant at that freq. At about 7pm cst
 last night 
 I finally got some current flowing in the loop, and I let it
 run over 
 night until about 9am CST this morning.
 
 In the capture you posted I don't see my signal, but I'm not
 sure if it 
 covered my up-time. Could you confirm that for me?
 
 I also don't know if a 50 Ft loop is enough wire in the sky,
 of if I 
 even have enough "fire in the wire" to reach you.  I'm
 at the beginning 
 in the lowfer transmitting curve.
 
 Do you have captures in that timeframe and if so could you
 take a look 
 for my signal?
 
 Thanks
 -- 
 73   de   N8OOU - Mike Meek