[Lowfer] WD2XNS in WOLF mode

[lloyd chastant]

Nice to see some Wolf
Lloyd W3NF



2013-02-16 14:45:48 >WOLF10  -r 8000.818 -f 800 -t 1.0 -w 0.0000
t:  24 f:-0.019 a: 0.4 dp: 82.4 ci: 7 cj:361 G.W2Q*.6R12FJIW ?
t:  48 f:-0.020 a: 0.5 dp: 85.6 ci: 7 cj:361 WD2XNS 100W TX  -
t:  96 f:-0.020 a: 0.4 dp: 86.9 ci: 7 cj:361 WD2XNS 100W TX  -
t: 192 f:-0.020 pm:379.7 jm:238 q:  6.2  7.1 WD2XNS 100W TX  -
t: 288 f:-0.020 pm:789.8 jm:238 q: 10.9 10.8 WD2XNS 100W TX  -




On Sat, Feb 16, 2013 at 2:41 PM, <jrusgrove at comcast.net> wrote:

> WD2XNS will be transmitting in WOLF mode for the next couple hours on
> 136.800 kHz. Power level will be adjusted up and down and will be indicated
> in the message.
>
> The GUI version of the decoder can be found at
> http://www.qsl.net/d/dl4yhf/**wolf/index.html<http://www.qsl.net/d/dl4yhf/wolf/index.html>. Be advised that this mode is more critical than most in terms of sound
> card calibration. There is a cal routine in the software if you have a
> known frequency source.
>
> Reports are appreciated.
>
> Jay W1VD  WD2XNS  WE2XGR/2
> ______________________________**______________________________**__
> Lowfer mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/lowfer<http://mailman.qth.net/mailman/listinfo/lowfer>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>