[Lowfer] WD2XES JASON Slow Turbo 137.441

[John Andrews]

Sorry, guys. It ran for about an hour, then something let go outside. 
Will investigate in the morning. Off for tonight.

John, W1TAG

On 8/28/2010 12:04 PM, John Andrews wrote:
> WD2XES will be running in JASON Slow Turbo mode on 137.441 kHz tonight,
> starting around 2330 UTC. Power will be 500 watts up to 0230, when it
> will again go to 50 watts for the overnight.
>
> JASON is a narrow-BW mode based on incremental frequency shift keying,
> decoding characters based on frequency shift, rather than the exact
> frequency. The software may be downloaded from I2PHD's site:
> http://www.weaksignals.com/
>
> Be sure to select the "turbo" mode in addition to slow. There is no
> error correction, so garbage characters may appear. Each tone is about
> 45 seconds long, and it will take a couple of tones before any decoding
> will take place. You can see what the signal "looks like" with a QRSS30
> screen.
>
> Reports are welcome.
>
> John Andrews, W1TAG/WD2XES
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.441 / Virus Database: 271.1.1/3099 - Release Date: 08/28/10 06:34:00
>