[Lowfer] IC-706

lewis wa4lip at gmail.com
Fri Jan 18 15:34:30 EST 2008


Thanks Stan,
For the info. I will give it a try and see how it works out.
I am trying to set up ARGO in the SSB mode.
Lewis


> Hello Lewis,
> 
> I believe the BFO offset (tone) in a CW mode is 800 Hz, menu adjustable 
> in steps of 10 Hz.
> Same as for the IC-703+ transceiver.
> CW mode is similar to LSB with a BFO offset.
> CW-R (reverse) is USB with the BFO offset.
> 
> No tone in USB/LSB mode.
> For a carrier RF input, with the RX  tuned in USB mode to the exact 
> freq, gives an audio output of 0Hz.
> for the same RF carrier, USB mode, Rx tuned 1 KHz low, gives an audio 
> output of 1 KHz.
> 
> Stan, W1LE
> 
> 
> Lewis wrote:
>> Could some one tell me the freq. of the SSB tone on the
>> !C-706.
>> Thanks Lewis
>> _______________________________________________
>>> From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
> 
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>


More information about the Lowfer mailing list