[LogPlus] logging with packet

Tue, 8 Jan 2002 16:36:26 -0500

Grant, thanks that did the trick... I run the local packet cluster on my
laptop, and
telnet on the main pc , along with LogPlus. This helps alot with quick
logging.
HNY tu Glenn VA3DX VE3ICR 8P9DX

----- Original Message -----
From: "Grant Mitchell" <[email protected]>
To: <[email protected]>
Sent: Monday, January 07, 2002 10:18 PM
Subject: Re: [LogPlus] logging with packet

> Hello Glenn,
>
> Sometimes you have to "force" the interface between radio and computer
> in the LOGGING WITH PACKET mode.  Try the following keystrokes: CTRL_F1
> (do this twice if RADIO ON shows in the top center of your monitor so
> RADIO ON shows again).  This will bring up the FREQUENCY but sometimes
> not the MODE. Changing to another MODE or BAND then back again gets the
> MODE working OK and you are all set.  Hope this helps.
>
> 73, Grant
> N4GM
>
> [email protected] wrote:
> >
> > Help ....
> >
> >   While in the logging without packet window; the frequencey and mode
info
> > is picked
> > up from my FT1000MP and displayed properly....
> >
> > However when I go to the logging with packet (where the telnet spots are
> > working ok);
> > the frequency and mode boxes are empty. When I place a call in the
callsign
> > field and
> > then hit "enter" to tab over., it jumps to the rst field. It will not
allow
> > me to place any
> > info in the freq/mode boxes. Is there a turn on command so the logging
with
> > packet
> > window will display the info from the FT1000MP ??   (using Ver 4.09 at
> > present)
> >
> > Thanks for any help..  Glenn VA3DX              [email protected]
> >
> > _______________________________________________
> > LogPlus mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logplus
> _______________________________________________
> LogPlus mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logplus
>