[LOGic] Misc. Stuff RE 2 MONITORS

[Ben Hatheway N6FM]

During a dxpedition I use both DX-Summit, DXscape and Telnet. When they are
processing downloaded spots, there is a freeze, but it doesn't last too
long...

> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-
> bounces at mailman.qth.net] On Behalf Of K0DAN
> Sent: Sunday, October 23, 2011 9:20 AM
> To: logic at mailman.qth.net
> Subject: Re: [LOGic] Misc. Stuff RE 2 MONITORS
> 
> Another thing I noticed as regards scrolling within the Spot Log, it seems
that
> every space within the Spot Log is NOT a sweet spot for the mouse scroll
> wheel...I was going to report that scroll only works if the mouse is in
the
> DATE POSTED TIME POSTED SPOT BY fields, but this is not true either....the
> scroll function seems to come and go (as if LOGic is distracted by some
other
> task for a few seconds, then enables scrolling again.
> 
> I use TELNET to post new spots, and it's pretty active, so there's a
chance that
> TELNET and LOGic are talking to each other, which causes an interrupt in
> scrolling.
> 
> This is with the Spot Log being placed inside the overall LOGic framework,
> and I think this does not have anything to do with multiple monitors.
> 
> It is a nitpick, but nonetheless inconvenient to sometimes have
functioning
> scroll, other times not.
> 
> 73
> dan
> k0dan
> 
> -----Original Message-----
> From: Ben Hatheway N6FM
> Sent: October 22, 2011 11:05 PM
> To: logic at mailman.qth.net
> Subject: Re: [LOGic] Misc. Stuff RE 2 MONITORS
> 
> This should cause some thought:
> 
> On monitor 2, if I place the framework for Logic , (the main form), on
monitor
> 2,  so that the spot log fits inside the main form, then place "on
desktop" as
> long as the spotlog is at least 60% within the main window, the mouse
wheel
> scroll works. If I drag it out so that part of it is on the windows
desktop and
> the other half within the main form, then wheel scrolling stops. Weird.
> 
> > -----Original Message-----
> > From: logic-bounces at mailman.qth.net [mailto:logic-
> > bounces at mailman.qth.net] On Behalf Of K0DAN
> > Sent: Saturday, October 22, 2011 8:46 PM
> > To: logic at mailman.qth.net
> > Subject: Re: [LOGic] Misc. Stuff RE 2 MONITORS
> >
> > It just occurred to me, my software allows me to select Primary &
> Secondary
> > monitors.
> >
> > For no special reason my brain says to logically select BOTTOM monitor
> > as
> #1
> > and TOP monitor as #2.
> >
> > At present, my rig control (Flex) and few other accessories are on the
> > bottom, LOGIC and other accessories are on the top...not sure where I
> realy
> > need the extra mouse "focus", but I assume by switching monitor
> > priorities
> I
> > might be able to push the envelope a little? Will give it a try...
> >
> > 73
> >
> >
> > k0dan
> >
> >
> > -----Original Message-----
> > From: Dennis
> > Sent: October 22, 2011 08:55 PM
> > To: logic at mailman.qth.net
> > Subject: Re: [LOGic] Misc. Stuff RE 2 MONITORS
> >
> > Thanks for the help with the monitors and scroll wheel Dan.
> >
> > I have seen this reported before.  Yes, they should behave the same,
> > but there is nothing we can do about it.  The map us being totally
> > rewritten in .NET so I suspect it will not be a problem. The current one
is in
> VB6.
> >
> > Tnx/73,
> >
> > DH
> >
> > On 10/22/2011 12:32 PM, K0DAN wrote:
> > > OK I found another weird one!
> > >
> > > a) LOGICMAP is on the primary monitor...if you drag the mouse over
> > > one
> of
> > > the spots, you get a little pop-up with details of the spot.
> > >
> > > b)  LOGICMAP is on the secondary...if you drag the mouse over one of
> > > the spots, you DO NOT get a little pop-up with details of the spot.
> > >
> > > Seems they should behave the same no matter where they are?
> > >
> > > 73
> > >
> > > dan
> > > k0dan
> > >
> > >
> >
> __________________________________________________________
> > ____
> > > LOGic mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/logic
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:LOGic at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net Please help support this
> > > email list: http://www.qsl.net/donate.html
> >
> >
> >
> __________________________________________________________
> > ____
> > LOGic mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/logic
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:LOGic at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> >
> __________________________________________________________
> > ____
> > LOGic mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/logic
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:LOGic at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> 
> __________________________________________________________
> ____
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> __________________________________________________________
> ____
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html