[LOGic] IC-7700 w/Logic8

[jeff]

 Well I'll be. I just tried this again, I already had it configured. All I 
did was move the serial cable from the CI-V adapter to the 232 port, did a 
reset radio interface and it works! I must forgot to do the radio reset when 
I configured, then tried it last night.  Now I just have to wait till after 
the Sweeps to see if a QSY to a spotted station running split  works 
correctly. Thanks Mel....

73 Jeff kb2m

----- Original Message ----- 
From: "Mel Martin" <ve2dc at videotron.ca>
To: "LOGic is open to all radio amateurs for discussion of LOGic logging 
program" <logic at mailman.qth.net>
Sent: Sunday, November 16, 2008 11:50 AM
Subject: Re: [LOGic] IC-7700 w/Logic8


> The settings for CI-V or RS232 are exactly the same in Logic. Just 
> configure the 7700's serial port for CI-V use (RS–232C Function)... It's 
> in the set menu under "other" I believe. It's easy to find. I use 19200 
> baud, no parity, 1 stop bit. Don't use autobaud.
>
> jeff wrote:
>>  Does anyone have Logic8 running with an Icom 7700 using the 7700's 
>> serial port ? I have it working with the CI-V port, but would like to use 
>> the 7700's 232 port.  If you got it working, please reply with your 7700 
>> AND Logic8 settings. Thanks in advance...
>>  73 Jeff kb2m