[LOGic] IC-7700 w/Logic8

[Mel Martin]

If it worked using TTL there is no reason it shouldn't work using 
RS232... the data is exactly the same, only the voltage levels changed.

jeff wrote:
> Well I'll be. I just tried this again, I already had it configured. All 
> I did was move the serial cable from the CI-V adapter to the 232 port, 
> did a reset radio interface and it works! I must forgot to do the radio 
> reset when I configured, then tried it last night.  Now I just have to 
> wait till after the Sweeps to see if a QSY to a spotted station running 
> split  works correctly. Thanks Mel....
> 
> 73 Jeff kb2m
> 
> ----- Original Message ----- From: "Mel Martin" <ve2dc at videotron.ca>
> To: "LOGic is open to all radio amateurs for discussion of LOGic logging 
> program" <logic at mailman.qth.net>
> Sent: Sunday, November 16, 2008 11:50 AM
> Subject: Re: [LOGic] IC-7700 w/Logic8
> 
> 
>> The settings for CI-V or RS232 are exactly the same in Logic. Just 
>> configure the 7700's serial port for CI-V use (RS–232C Function)... 
>> It's in the set menu under "other" I believe. It's easy to find. I use 
>> 19200 baud, no parity, 1 stop bit. Don't use autobaud.
>>
>> jeff wrote:
>>>  Does anyone have Logic8 running with an Icom 7700 using the 7700's 
>>> serial port ? I have it working with the CI-V port, but would like to 
>>> use the 7700's 232 port.  If you got it working, please reply with 
>>> your 7700 AND Logic8 settings. Thanks in advance...
>>>  73 Jeff kb2m
> 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 

-- 
Mel, VE2DC