[Logic] Accessing QRZ cd-rom callbook data from Logic 7

[Michael A. Newell, WB4HUC]

I've recently upgraded from Logic 5 to Logic 7. I want to use the QRZ
CD-ROM callbook data as my callbook source. QRZ is installed in
the C:\QRZ HAM RADIO\CALLBK directory

In the on-line Help for Logic 7, it says:

"To install a CD-ROM database, insert it in your CD-ROM in the drive.  =
Enable the database in Setup as described above, then attempt to access =
it by searching for a call.  During this initial access, LOGic will =
attempt to locate the CD-ROM.  If it cannot be found, LOGic will prompt =
you for the database location.  The location will be stored for future =
use."

This isn't what happens with my installation. When I enter a call sign,
it tells me to copy the CALLBK directory to the root directory of my =
hard drive.
It doesn't let me enter the location of the callbook data.

Is there any way to point LOGIC 7 to the orignal QRZ CALLBK directory?=20

Thanks,

Mike Newell - WB4HUC
Austin, TX
http://wb4huc.home.texas.net



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---