[Logic] Rotor setting

Sun, 7 Jul 2002 17:18:00 -0500

Hi all,

Not knocking the technology of automatic rotor control, but it
does have limitations especially in DXing.  For real long haul
stuff, sometimes a skewed path, from a very unexpected direction
will yield the greatest signal.  Another example is backscatter.
Yesterday, CY9DH came on 10M and started working a pileup.
When I pointed right at him he was gone.  When I pointed SE
his signal came up and I worked him on BS.

Your mileage may vary,

Ken AB5A

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of K1UQ
Sent: Friday, July 05, 2002 6:38 PM
To: [email protected]
Subject: Re: [Logic] Rotor setting

Sante,

you did not mention how you control your rotator (hardware) and what you
have for a rotator.  If it is SARtek controller, here are my settings:

Rotor 1:        SARtek 1B
Port:              COM2
Baud Rate:    1200
Stop Bits:      1
Description:  G-800SDX
Reverse:        Selected

Rotor 2:        (none)

Try selecting:   Reset Radio & Rotor Interfaces.

GL & 73,  Bill  K1UQ

----- Original Message -----
From: "Sante - IK0HBN" <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 03, 2002 2:08 AM
Subject: [Logic] Rotor setting

> Hi Logic users,
> I finally found a multi serial port to allow all the stuffs connected to
> Logic running. I have just one problem when recalling the ROTOR HEAD
window
> and trying to beam the antenna somewhere. Below the error message I got:
> "The last-selected log form doesn't have a Rotor Interface associated
with
> it. Please select a log form with an associated rotor interface".
>
> Where I wrong? I have just selected the Rotor type and port in TOOLS >
> SETUP >  STATION INFORMATION,MISC HAM SETUP, RIG, TNC....
>
> Ps. It does not matter changing the COM port....
> Thanks in advance.
> Sante
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic

--- StripMime Report -- processed MIME parts ---
multipart/signed
  text/plain (text body -- kept)
  application/x-pkcs7-signature
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---