[KYHAM] Sunday's Specialized Communication Net ref. PC power supply conversion

Bill Fuqua [email protected]
Mon, 15 Dec 2003 14:58:19 -0500


Mark asked about conversions of PC switching supplies to 12 volt applications.	

Here is an article that I was thinking about that tells about converting a 
PC power supply to 12 switcher.

http://www.qrp4u.de/index_en.html

and another a bit more complex

http://www.qrp4u.de/index_en.html

Or one could try putting the  5v outputs from three PC switching supplies 
in series to get 15 volts at a lot of amps.
The grounds of the supplies would have to be isolated. They outputs are 
usually grounded
by one or two traces on the circuit boards to the case.

73
Bill wa4lav