[Kenwood] OmniRig

[Michael Waldrop]

One additional item. The radio's serial port speed and the computer's serial port speed MUST be the same otherwise there will be no communications between the radio and the computer through the TTL to RS-232 serial interface.

Pin 1 on the radio's ACC1's socket is the ground for both pins 2 and 3. Pin 1 is not the ground pin for the computer's RS-232 so do not connect the ACC1 pin 1 to the computer's RS-232 ground.

73
Mike
W5RKL


--- On Thu, 10/2/08, Kurt Wiksten <kurt.wiksten at tele2.se> wrote:
From: Kurt Wiksten <kurt.wiksten at tele2.se>
Subject: [Kenwood] OmniRig
To: Kenwood at mailman.qth.net
Date: Thursday, October 2, 2008, 5:20 AM



 
 

I am using Kenwood TS850S and want to use the 
OmniRig program by VE3NEA to control the rig.
The Ts850S Instruction Manual tells me to use the 
ACC1 connector and the optional IF-232C interface which I do not 
have.
I want to do my own interfacing, but do not know 
the internal wiring for the ACC1 connector.
Can anyone help me with this 
problem???
 
73 de SM6BGG
email:kurt.wiksten at fargelanda.mail.telia.com______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/kenwood/attachments/20081002/26a9657f/attachment.htm