[Kenwood] TS850 and SB200

[Tom Osborne]

Right, especially when you can build a cable and interface for about 10 
bucks.  Why take a chance thinking, "It might work."  73
Tom W7WHY


> Simple question.....
>
> IF the relay is NOT capable of handling the voltage and/or current 
> requirements of the SB-200 relay ...
>
> Would you rather
>
> 1. Replace an external, standard, readily available, easily accessed 
> relay?
>
> or, worst case, (thanks Murphy....)
>
> A. Replace an internal relay available ONLY from Kenwood, buried three 
> layers deep and soldered onto a multilayer PC board?
>
> 73, Garey - K4OAH
> Glen Allen, VA