[Kenwood] TS-940 Display/PLL(?) Issue

[Garey Barrell]

John -

Yes, that indicates that one or more of the PLLs is unlocked.   Solder 
joints are first suspect, then alignment.  The 940 does NOT have the 
potting compound problem of the 440.

Lots of information at

<http://homepages.ihug.co.nz/~jaking/TS-940_02.htm#_Toc100503113>

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs
<www.k4oah.com>



John Unrath wrote:
> Hi,
>
> I have a Kenwood TS-940. The frequency display tracks the frequency as long as the display is changing. As son as I stop turning the knob, the display blanks. I believe that is an indicator of 'frequency out of range.' Could it be that the PLL is failing to lock? And short of looking for cold solder joints on the PLL board, is there anything else I can try first?
>
> Thanks,
> John Unrath
> K6JHU
>
>
>