[Kenwood] TS-530SP question

[Stephen Davis]

Hi Gene,

     The bias control is on the back of the radio just under the antenna
connector.  It is covered with a metal cap that you can with your fingers.
Once the cap is off, you can adjust the bias.

73's

Steve K7QHU 

-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of WØQFC
Sent: Saturday, May 06, 2006 3:13 PM
To: kenwood
Subject: [Kenwood] TS-530SP question
Importance: High

Is there anyone out there that has used the above rig and could help me with
the tune-up procedure?
Yes, I am old.
Yes, I am confused.
Yes, I can still read, but the book is not clear about the tuning procedure.
Page 16 says to:
Set the mode switch to SSB
Meter switch to Ip
Stand-by switch to send and adjust the bias to 60 mA.
There is no bias control on the rig - at least, I can not find one!
What the heck am I missing????

TIA
Gene, WØQFC
Spring Hill, Florida
WEB SITE:
http://www.w0qfc.com

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net