[Kenwood] TS-530SP question

[Stephen Goldberg]

Gene,
The bias control is a screw driver adjustment under the antenna connector on
the back of the rig.
Steve W4IMF
----- Original Message ----- 
From: "WØQFC" <erastber at tampabay.rr.com>
To: "kenwood" <kenwood at mailman.qth.net>
Sent: Saturday, May 06, 2006 5:13 PM
Subject: [Kenwood] TS-530SP question


> Is there anyone out there that has used the above rig and could help me
with
> the tune-up procedure?
> Yes, I am old.
> Yes, I am confused.
> Yes, I can still read, but the book is not clear about the tuning
procedure.
> Page 16 says to:
> Set the mode switch to SSB
> Meter switch to Ip
> Stand-by switch to send and adjust the bias to 60 mA.
> There is no bias control on the rig - at least, I can not find one!
> What the heck am I missing????
>
> TIA
> Gene, WØQFC
> Spring Hill, Florida
> WEB SITE:
> http://www.w0qfc.com
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
>



-- 
Certified Virus Free.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.5/333 - Release Date: 5/5/06