[Kenwood] Re: 940SAT - no power out in FSK mode

Mon, 14 Jan 2002 11:15:03 -0600

Good day Don

YES!, that was exactly the problem.  I had knocked or brushed the control 
and inadvertently turned down the processor out.

Thanks for the response and to those who offered other suggestions.

73, Bart - VE5CPU

At 09:47 PM 01-13-2002, you wrote:
>Bart,
>
>Check and make sure the PROCESSOR knobs are not turned down.  If turned 
>down, you will get no output even if the processor is not turned 
>on.  Also, check for any upscale ALC  deflection. You should get full 
>scale deflection with the processor output knob turned to 12 o'clock. 
>Input knob will have no effect.
>
>Don  AF4Z
>
>At 07:29 PM 01/13/2002 -0600, you wrote:
>>Good day everyone
>>
>>My Kenwood 940SAT has developed a problem during my last RTTY 
>>session.  When set to FSK mode there is little to no power output being 
>>generated by the radio.  Based on the internal meter it looks like about 
>>5 watts.
>>
>>In LSB, USB, CW, AM & FM mode, it develops full power, about 110 watts on 
>>the internal meter.
>>
>>Any ideas?
>>
>>Thanks in advance for your comments
>>
>>Regards
>>   Bart - VE5CPU
>>
>>
>>
>>- - -
>>
>>Your moderator for this list is:
>>Larry Wilson KE1HZ [email protected]
>>
>>_______________________________________________
>>Kenwood mailing list
>>[email protected]
>>http://mailman.qth.net/mailman/listinfo/kenwood