[JMS] Lambda 28 and a RUH ROH

[Don Buska]

Hi Ronnie,

Wouldn't it be a 24VAC transformer if you are seeing 32VAC on the 
primary side?  If it were a 6.3VAC secondary you would see the original 
line voltage level (back-to-back 6.3VAC windings).  Does it have a 
center-tap on the secondary?  You might be able to feed that instead to 
get the 64VAC output you want.  Just a thought.  Still best is return it 
to RS if they are close by.

AWA conference was great as usual.  I'll write something up next week 
for the JMS to report about the Millen and National stuff seen.  Plus 
whom amoung the JMS'ers attended.

73,

Don N9OO

ronnie.hull wrote:
> well got her all finished up this morning ( the multi volt side, not the HV 
> senseing ) and fired her up..   ruh roh
> 
> all voltages are HALF what they are supposed to be.
> 
> I bought a little 12.6vac transformer yesteday from radio shack and it must 
> have been a 6.3v tranny that was mis packaged. There is 6.5vac going into the 
> 12.6 secondary of the transformer just like it should be, but on the primary 
> side of the transformer, at the AC terminals of the Bridge there is only 32 
> volts.. that don't sound right... 
> 
> I'll let ya know
> 
> R
> ______________________________________________________________
> James_Millen_Society mailing list
> Home: http://mailman.qth.net/mailman/listinfo/james_millen_society
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:James_Millen_Society at mailman.qth.net
>