[ICOM] 60 m on 756 Pro iii

[Bruce]

I have a PRO3 too and it has no 60 meter channels.

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
Weissman, M.D.
Sent: Sunday, March 13, 2016 3:17 PM
To: ICOM Reflector <icom at mailman.qth.net>
Subject: Re: [ICOM] 60 m on 756 Pro iii

Hi Bruce,

The Pro III has five SSB "channels" on 60m.  That's how it came. 
(Actually, the FCC change some of the freqs afterwards).  I've used them
with success.  BUT - no CW or RTTY was originally included.

Thanks,


Mike




On 3/13/2016 17:20, Bruce wrote:
> I wouldn't try 60 meters at all unless the rig had it originally and 
> that goes for the PRO3 , don't attempt it unless you use 50 watt 
> output or less. Anything higher power will burn up components in the 
> low pass filter of the PA.
> The PRO3 should be good all modes and if yours is not working right 
> try a full CPU reset to get all modes back.
>
> -----Original Message-----
> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael 
> Weissman, M.D.
> Sent: Sunday, March 13, 2016 11:52 AM
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: [ICOM] 60 m on 756 Pro iii
>
> Is there a way to add CW / RTTY and the new channels to an original 
> 756 Pro iii.  Mine only works on SSB.
>
> Thanks,
>
>
> 73,  Mike
> K2CBI
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
>


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html