[ICOM] 60 m on 756 Pro iii

[Michael Weissman, M.D.]

Hi Bruce,

The Pro III has five SSB "channels" on 60m.  That's how it came. 
(Actually, the FCC change some of the freqs afterwards).  I've used them 
with success.  BUT - no CW or RTTY was originally included.

Thanks,


Mike




On 3/13/2016 17:20, Bruce wrote:
> I wouldn't try 60 meters at all unless the rig had it originally and that
> goes for the PRO3 , don't
> attempt it unless you use 50 watt output or less. Anything higher power will
> burn up components
> in the low pass filter of the PA.
> The PRO3 should be good all modes and if yours is not working right try a
> full CPU reset to get
> all modes back.
>
> -----Original Message-----
> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
> Weissman, M.D.
> Sent: Sunday, March 13, 2016 11:52 AM
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: [ICOM] 60 m on 756 Pro iii
>
> Is there a way to add CW / RTTY and the new channels to an original 756
> Pro iii.  Mine only works on SSB.
>
> Thanks,
>
>
> 73,  Mike
> K2CBI
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>