[ICOM] 60 m on 756 Pro iii

[Michael Weissman, M.D.]

There are no markings for 60 on the front panel  but the "Gene" button 
allows you to tune in the frequencies.  See the manual.  SSB only tho.



On 3/13/2016 21:54, Bruce wrote:
> I have a PRO3 too and it has no 60 meter channels.
>
> -----Original Message-----
> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
> Weissman, M.D.
> Sent: Sunday, March 13, 2016 3:17 PM
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: Re: [ICOM] 60 m on 756 Pro iii
>
> Hi Bruce,
>
> The Pro III has five SSB "channels" on 60m.  That's how it came.
> (Actually, the FCC change some of the freqs afterwards).  I've used them
> with success.  BUT - no CW or RTTY was originally included.
>
> Thanks,
>
>
> Mike
>
>
>
>
> On 3/13/2016 17:20, Bruce wrote:
>> I wouldn't try 60 meters at all unless the rig had it originally and
>> that goes for the PRO3 , don't attempt it unless you use 50 watt
>> output or less. Anything higher power will burn up components in the
>> low pass filter of the PA.
>> The PRO3 should be good all modes and if yours is not working right
>> try a full CPU reset to get all modes back.
>>
>> -----Original Message-----
>> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
>> Weissman, M.D.
>> Sent: Sunday, March 13, 2016 11:52 AM
>> To: ICOM Reflector <icom at mailman.qth.net>
>> Subject: [ICOM] 60 m on 756 Pro iii
>>
>> Is there a way to add CW / RTTY and the new channels to an original
>> 756 Pro iii.  Mine only works on SSB.
>>
>> Thanks,
>>
>>
>> 73,  Mike
>> K2CBI
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
>> http://www.qsl.net/icom/ To support QSL/QTH.net:
>> http://www.qsl.net/donate.html
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
>> http://www.qsl.net/icom/ To support QSL/QTH.net:
>> http://www.qsl.net/donate.html
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
> support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>