[ICOM] 746

[Lloyd Curry]

Have not been in the menus. I did a full reset. Why would that remove
the filter?

On Sat, Jan 30, 2016 at 6:41 PM, John Geiger <af5cc2 at gmail.com> wrote:
> Also, did you a full reset or somehow get into the menus and assign the
> filter to a different location that is empty?
>
> On Sat, Jan 30, 2016 at 5:24 PM, Gary Fiber <gfiber at comcast.net> wrote:
>
>> You might also just gently pull up on the filter. I have seen the filter
>> case short to the mounting holes. Sometimes placing some electrical tape on
>> the filter bottom will prevent it from happening. Could also be a filter
>> that has gone bad.
>>
>> Gary P. Fiber K8IZ
>> gfiber1952 at gmail.com
>> gfiber at comcast.net
>>
>>
>>
>>
>> > On Jan 30, 2016, at 2:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
>> >
>> > I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
>> > filter has stopped working. When I push in the filter button the "nar"
>> > appears on the screen but there is no change in the audio or bandwith.
>> > Any ideas?
>> >
>> > --
>> > Lloyd C. Curry
>> > Amateur Radio NA4D
>> > Greensburg, KY
>> >
>> > I'm so nice I wish I had a friend just like me.
>> > ----
>> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> > Icom FAQ: http://www.qsl.net/icom/
>> > To support QSL/QTH.net: http://www.qsl.net/donate.html
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html



-- 
Lloyd C. Curry
Amateur Radio NA4D
Greensburg, KY

I'm so nice I wish I had a friend just like me.