[ICOM] 746
Gary Fiber
gfiber at comcast.net
Sun Jan 31 02:19:52 EST 2016
Icom, though do not remember specifically about the 746, went to a menu setting to turn on and off the filters otherwise the radio does not know they are installed. Check the set mode in the manual and there you will likely find the method for enabling filters that are installed by the filter number.
Gary P. Fiber K8IZ
gfiber1952 at gmail.com
gfiber at comcast.net
> On Jan 30, 2016, at 10:50 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
>
> Have not been in the menus. I did a full reset. Why would that remove
> the filter?
>
>> On Sat, Jan 30, 2016 at 6:41 PM, John Geiger <af5cc2 at gmail.com> wrote:
>> Also, did you a full reset or somehow get into the menus and assign the
>> filter to a different location that is empty?
>>
>>> On Sat, Jan 30, 2016 at 5:24 PM, Gary Fiber <gfiber at comcast.net> wrote:
>>>
>>> You might also just gently pull up on the filter. I have seen the filter
>>> case short to the mounting holes. Sometimes placing some electrical tape on
>>> the filter bottom will prevent it from happening. Could also be a filter
>>> that has gone bad.
>>>
>>> Gary P. Fiber K8IZ
>>> gfiber1952 at gmail.com
>>> gfiber at comcast.net
>>>
>>>
>>>
>>>
>>>> On Jan 30, 2016, at 2:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
>>>>
>>>> I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
>>>> filter has stopped working. When I push in the filter button the "nar"
>>>> appears on the screen but there is no change in the audio or bandwith.
>>>> Any ideas?
>>>>
>>>> --
>>>> Lloyd C. Curry
>>>> Amateur Radio NA4D
>>>> Greensburg, KY
>>>>
>>>> I'm so nice I wish I had a friend just like me.
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>
> --
> Lloyd C. Curry
> Amateur Radio NA4D
> Greensburg, KY
>
> I'm so nice I wish I had a friend just like me.
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
More information about the Icom
mailing list