[ICOM] 746

[John Geiger]

Also, did you a full reset or somehow get into the menus and assign the
filter to a different location that is empty?

On Sat, Jan 30, 2016 at 5:24 PM, Gary Fiber <gfiber at comcast.net> wrote:

> You might also just gently pull up on the filter. I have seen the filter
> case short to the mounting holes. Sometimes placing some electrical tape on
> the filter bottom will prevent it from happening. Could also be a filter
> that has gone bad.
>
> Gary P. Fiber K8IZ
> gfiber1952 at gmail.com
> gfiber at comcast.net
>
>
>
>
> > On Jan 30, 2016, at 2:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
> >
> > I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
> > filter has stopped working. When I push in the filter button the "nar"
> > appears on the screen but there is no change in the audio or bandwith.
> > Any ideas?
> >
> > --
> > Lloyd C. Curry
> > Amateur Radio NA4D
> > Greensburg, KY
> >
> > I'm so nice I wish I had a friend just like me.
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>