[ICOM] Wave Files not keying IC746 VOX

[Phil Krichbaum]

You may have to use a PTT line from computer/N1MM or a Y splitter with 
the mic.Phil N0KE

Larry Young wrote:
> Mike: Check your 746 manual, and I am sure the VOX  works only from the front mic input, and not from the rear acc connector.Larry K4LXV
>   
>
>     On Wednesday, January 20, 2016 12:05 PM, Mike <k4gmh at arrl.net> wrote:
>  
>
>  Trying to get my IC746 to transmit using the VOX when a Wave file is played
> from the computer.  The 746 does work when the "TRANSMIT" button on the
> front panel is engaged and the function key is pressed.  Then the Wave file
> will drive the radio to full output and sounds good when listening using
> the built in monitor on the 746.  Also, VOX works without pushing the
> "TRANSMIT" button using a microphone.
>
> The wave file comes from the computer into the 746 via ACC1, pin 4.
>
> N1MM+ is the contest S/W being used.
>
>   73,
>   Mike, K4GMH
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>   
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html