[ICOM] Wave Files not keying IC746 VOX

[Larry Young]

Mike: Check your 746 manual, and I am sure the VOX  works only from the front mic input, and not from the rear acc connector.Larry K4LXV
  

    On Wednesday, January 20, 2016 12:05 PM, Mike <k4gmh at arrl.net> wrote:
 

 Trying to get my IC746 to transmit using the VOX when a Wave file is played
from the computer.  The 746 does work when the "TRANSMIT" button on the
front panel is engaged and the function key is pressed.  Then the Wave file
will drive the radio to full output and sounds good when listening using
the built in monitor on the 746.  Also, VOX works without pushing the
"TRANSMIT" button using a microphone.

The wave file comes from the computer into the 746 via ACC1, pin 4.

N1MM+ is the contest S/W being used.

  73,
  Mike, K4GMH
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html