[ICOM] Wave Files not keying IC746 VOX
Phil Krichbaum
vailphil at sopris.net
Wed Jan 20 13:28:20 EST 2016
Some desk type mics have a plug for other audio in!
Larry Young wrote:
> Mike: Check your 746 manual, and I am sure the VOX works only from the front mic input, and not from the rear acc connector.Larry K4LXV
>
>
> On Wednesday, January 20, 2016 12:05 PM, Mike <k4gmh at arrl.net> wrote:
>
>
> Trying to get my IC746 to transmit using the VOX when a Wave file is played
> from the computer. The 746 does work when the "TRANSMIT" button on the
> front panel is engaged and the function key is pressed. Then the Wave file
> will drive the radio to full output and sounds good when listening using
> the built in monitor on the 746. Also, VOX works without pushing the
> "TRANSMIT" button using a microphone.
>
> The wave file comes from the computer into the 746 via ACC1, pin 4.
>
> N1MM+ is the contest S/W being used.
>
> 73,
> Mike, K4GMH
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
More information about the Icom
mailing list