[ICOM] Icom IC-M700PRO power cable.

[John K0CQW]

Thanks I will order this one again, This is the 3rd cable that I have
received that is wrong. I checked other M700PRO's and the radio connectors
are the same on all of the M700PRO's here. So it is not the radio..... No
support from a major "marine" Icom dealer.............
 Thanks again, de John KØCQW

On Thu, Jul 23, 2015 at 1:23 PM, Gary Fiber <gfiber at comcast.net> wrote:

> Yes it is in the manual page no. 15 under unpacking the DC Cable is part
> number OPC-568. I seem to remember it is made of 10 gauge wire and possible
> wire opposite of Icom's amateur HF rigs. I worked at Icom when this
> transceiver was sold and I supported it, however to many years have gone by
> since I last saw one. You can also email Icom America's parts dept.
> directly from Icom America's web page under Support.
>
> Hope this helps
>
> Gary P. Fiber K8IZ
>
>
>
> > On Jul 23, 2015, at 10:40 AM, John K0CQW <k0cqwgroups at gmail.com> wrote:
> >
> > Looking for the Icom part number for the  power cable for the IC-M700PRO.
> >
> > Not in the manual.
> >
> > Called icom at 425 450 6087 three different days at different times,
> waited
> > 15 min each time and did not get though.
> >
> > Looking for the part number for the power cable fpr the IC-M700PRO , The
> > 700 will not work nor the IC-M892.
> >
> > Thanks de John KØCQW
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html