[ICOM] Icom IC-M700PRO power cable.

[Gary Fiber]

Yes it is in the manual page no. 15 under unpacking the DC Cable is part number OPC-568. I seem to remember it is made of 10 gauge wire and possible wire opposite of Icom's amateur HF rigs. I worked at Icom when this transceiver was sold and I supported it, however to many years have gone by since I last saw one. You can also email Icom America's parts dept. directly from Icom America's web page under Support.

Hope this helps

Gary P. Fiber K8IZ



> On Jul 23, 2015, at 10:40 AM, John K0CQW <k0cqwgroups at gmail.com> wrote:
> 
> Looking for the Icom part number for the  power cable for the IC-M700PRO.
> 
> Not in the manual.
> 
> Called icom at 425 450 6087 three different days at different times, waited
> 15 min each time and did not get though.
> 
> Looking for the part number for the power cable fpr the IC-M700PRO , The
> 700 will not work nor the IC-M892.
> 
> Thanks de John KØCQW
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html