[ICOM] USB to remote plug for the IC-718

[Patrick - kB8RTZ]

Larry,

Appreciate your answer. I have a CT-17. The laptop only has USB ports. I plugged a USB to serial converter into the USB port, then the 9 pin to 25 pin cable from the converter to the CT-17, then cabling from the CT-17 to the IC-718.

I get no communication to the radio, and not so certain any communication with the CT-17. I read that communication directly with the CT-17 may be achieved using hyperterminal. I tried that route with no luck, either.

I am slowly narrowing down the options trying to figure out if the converter is not working properly with the CT-17 or if the CT-17 is faulty. I am guessing it is more human error than anything else.

Any thoughts?

Patrick...

Sent from the magic of technological innovation

On Aug 18, 2013, at 16:24, Larry Young <k4lxv at bellsouth.net> wrote:

Patrick: The remote input on most Icom radios is a CI-V input, 3rd party adapters for which are very inexpensive. Some for less than $10 including the drivers. Try a CI-V adapter input on E-Bay and look at the offerings.
Larry K4LXV




________________________________
From: Edward L Dowdy <ka9ees at comcast.net>
To: ICOM Reflector <icom at mailman.qth.net> 
Sent: Sunday, August 18, 2013 3:51 PM
Subject: Re: [ICOM] USB to remote plug for the IC-718


No.


-----Original Message----- From: Patrick - kB8RTZ
Sent: Sunday, August 18, 2013 2:46 PM
To: Icom Mail List
Subject: [ICOM] USB to remote plug for the IC-718

So the question is, can a USB cable be canabalized to segregate the data lines from the power lines, solder a 3.5 mm plug to the data lines and be able to make a direct connection from the PC USB port to the remote jack on the IC-718?

Cheers de Patrick ...

Sent from the magic of technological innovation
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html 
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html