[ICOM] USB to remote plug for the IC-718

[Larry Young]

Patrick: The remote input on most Icom radios is a CI-V input, 3rd party adapters for which are very inexpensive. Some for less than $10 including the drivers. Try a CI-V adapter input on E-Bay and look at the offerings.
Larry K4LXV




________________________________
 From: Edward L Dowdy <ka9ees at comcast.net>
To: ICOM Reflector <icom at mailman.qth.net> 
Sent: Sunday, August 18, 2013 3:51 PM
Subject: Re: [ICOM] USB to remote plug for the IC-718
 

No.


-----Original Message----- From: Patrick - kB8RTZ
Sent: Sunday, August 18, 2013 2:46 PM
To: Icom Mail List
Subject: [ICOM] USB to remote plug for the IC-718

So the question is, can a USB cable be canabalized to segregate the data lines from the power lines, solder a 3.5 mm plug to the data lines and be able to make a direct connection from the PC USB port to the remote jack on the IC-718?

Cheers de Patrick ...

Sent from the magic of technological innovation
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html 
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html