[ICOM] Help with IC-7410

[nagel.david at sbcglobal.net]

Make sure the USB converter is matched to the com port that the driver and programs are looking at. Most converters use 2 digit comm port addresses.

Dave

--- On Fri, 9/7/12, Jeff Freedman <jeff.freedman at comcast.net> wrote:

> From: Jeff Freedman <jeff.freedman at comcast.net>
> Subject: [ICOM] Help with IC-7410
> To: icom at mailman.qth.net
> Date: Friday, September 7, 2012, 11:36 AM
> 
> 
> Need some help with an ICOM IC-7410. Loaded the USB driver
> and configured
> with radio just fine. Neither ACLog, N1MM or nGenLog logging
> programs will
> sync with the rig after settings match to the COM port
> (bauds, partity,
> etc). Any suggestions?
>  
> I assume the USB port replaces the traditional CI-V
> interface? 
> 
> Anyone have a logging program that they have working with
> the 7410 and the
> USB port?
> 
> Appreciate your assist. 73 es DX - Jeff K7JF
> 
> ____________________________________________
> jeff freedman  |  Gig Harbor (Purdy), Washington
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>