[ICOM] - IC-2100H

[John]

Looks like that is what I will have to do. There might be something stuck 
behind the switches. They won't even depress a bit.

Thanks, John

On 3/24/2012 12:34 PM, Jim Vaughan wrote:
> John,
>
> All the buttons on the front panel of the radio work as they are supposed
> to.  You might take the front
> panel off and check them.  All the buttons are supposed to function as
> indicated on the front panel.
>
> Lock/Set
> Anm/Moni
> Dup/Low
> T-Scan/Tone
> Prio/M/Call
> Scan/V/Mhz
>
> Do you have the manual?
>
> 73,
> Jim, K4TXJ
> ______________________________________________________________________________________________
>
>
>
>
>
>
> ----- Original Message -----
> From: "John"<n5tim at sbcglobal.net>
> To: "ICOM Reflector"<icom at mailman.qth.net>
> Sent: Saturday, March 24, 2012 1:21 PM
> Subject: Re: [ICOM] - IC-2100H
>
>
>> Jim,
>>
>> The buttons I am referring to are 4 left side buttons, next to the mike
>> jack
>> and just below the display on the radio body. They have no affect with or
>> without the mike plugged in. The two buttons on the right side below the
>> display work as normal.
>>
>> Thanks, John
>>
>> On 3/24/2012 12:16 PM, Jim Vaughan wrote:
>>> John,
>>>
>>> Are the buttons that you are having trouble with on the microphone or on
>>> the
>>> radio?
>>>
>>> I have the same radio in front of me and all the buttons work.  The
>>> buttons
>>> on the mic
>>> are the "Up-Down" buttons and the "VFO-MR" buttons and they all are
>>> supposed
>>> to work.
>>>
>>> You might take the mic case apart and check inside.
>>>
>>> Hope this helps.
>>>
>>> 73,
>>> Jim, K4TXJ
>>> Louisville, Ky.
>>> _____________________________________________________________________________________________
>>>
>>> ----- Original Message -----
>>> From: "John"<n5tim at sbcglobal.net>
>>> To: "ICOM Reflector"<icom at mailman.qth.net>
>>> Sent: Saturday, March 24, 2012 11:51 AM
>>> Subject: [ICOM] - IC-2100H
>>>
>>>
>>>> I have an IC-2100H with the HN-98S microphone. I can get it all to work
>>>> except
>>>> the four buttons on the left on the front panel. They feel as if they
>>>> are
>>>> fake, no movement like the two right buttons. Is this by design for use
>>>> with
>>>> the 98S mike or is this a switch failure?
>>>>
>>>> Thanks for any insight.
>>>>
>>>> 73, John - N5TIM
>>>>
>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>> -- 
>> John Galvin - N5TIM
>> www.n5tim.info for Public Service Info
>> www.collinares.net/
>> www.garlandraces.net
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>

-- 
John Galvin - N5TIM
www.n5tim.info for Public Service Info
www.collinares.net/
www.garlandraces.net