[ICOM] - IC-2100H

[John]

Jim,

The buttons I am referring to are 4 left side buttons, next to the mike jack 
and just below the display on the radio body. They have no affect with or 
without the mike plugged in. The two buttons on the right side below the 
display work as normal.

Thanks, John

On 3/24/2012 12:16 PM, Jim Vaughan wrote:
> John,
>
> Are the buttons that you are having trouble with on the microphone or on the
> radio?
>
> I have the same radio in front of me and all the buttons work.  The buttons
> on the mic
> are the "Up-Down" buttons and the "VFO-MR" buttons and they all are supposed
> to work.
>
> You might take the mic case apart and check inside.
>
> Hope this helps.
>
> 73,
> Jim, K4TXJ
> Louisville, Ky.
> _____________________________________________________________________________________________
>
> ----- Original Message -----
> From: "John"<n5tim at sbcglobal.net>
> To: "ICOM Reflector"<icom at mailman.qth.net>
> Sent: Saturday, March 24, 2012 11:51 AM
> Subject: [ICOM] - IC-2100H
>
>
>> I have an IC-2100H with the HN-98S microphone. I can get it all to work
>> except
>> the four buttons on the left on the front panel. They feel as if they are
>> fake, no movement like the two right buttons. Is this by design for use
>> with
>> the 98S mike or is this a switch failure?
>>
>> Thanks for any insight.
>>
>> 73, John - N5TIM
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>

-- 
John Galvin - N5TIM
www.n5tim.info for Public Service Info
www.collinares.net/
www.garlandraces.net