[ICOM] UT-102 operation in IC-756Pro3 help

[Gary Fiber]

Get it onto a nice signal. Hit the lock button for 2 seconds like you 
found to do,  the S-Mater reading is usually first goes something like 
this. 9, being the S meter reading, a very short pause then says 
14.230.00 MHz
I'll play a bit with my IC-7000 this weekend and see how it work,but the 
UT-102 used to work this way a number of years ago.

Gary K8IZ




On 4/6/2012 1:41 PM, Stephen Budensiek wrote:
> Hello all,
>     Got a UT-102 in today, installed it in a IC-756ProIII.
>
> Setup is:
>     SPEECH Language         English
>     SPEECH Speed              High (also tried LOW)
>     SPEECH S-Level             ON
>
>     I've found that hitting and holding the LOCK button for 2 seconds
> generates the speech frequency reading.   Hitting a mode button to
> change mode generates a speech mode reading.   Absolutely nothing I've
> done generates the S-Meter speech reading.  Anyone have any ideal what
> is going on?  The users manual is absolutely useless on this.  Cycling
> the radio off and back on doesn't help any either.
>     I had a IC-756ProII for a little while, it had several major
> problems, so I returned it.   But, it responded very differently to
> Speech request.   Anytime I hit a band key, it would speak the
> frequency and mode.   Don't know if someone had done a special mod
> somewhere to do this?   Maybe it was part of the cause of the radio
> acting wierd part of the time?
>     Any input would be appreciated on this.
>
> 73's de Stephen, K0SD
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with Shipboard Radar Endorsement
Washington State Resident