[ICOM] 706 and 745

Gary P. Fiber gfiber at comcast.net
Sat Mar 12 17:58:06 EST 2011 

Well don't give up the ship. They may have something that will work. 
http://www.coilcraft.com/

Gary K8IZ



On 3/12/2011 2:39 PM, Pete Barnes wrote:
> It has ATLAS JAPAN stamped on the can along wih LS266  J4 J4 isprobably a
> run #
> or date code.I've been all over the net to no avail can't find squat on
> atlas.I believe it's about
> 9.1 mhz from the circuit.I have no parameters on it.I could try to rewind it
> but my eyes are crap so there we are.It would be good to find out a cross
> reference for these.I used to own an electronic repair shop and remember
> this problem before>Some manufacturers used to  put the part # and the
> suppliers part # with it but Icom didn't seem to for these.Oh well
>
> thanks guys Pete
>
> these new TV's put out ahelluva racket all over the bands
>
> On Sat, Mar 12, 2011 at 2:22 PM, Gary P. Fiber<gfiber at comcast.net>  wrote:
>
>> Maybe one of these will work.
>>
>> http://www.mouser.com/catalog/specsheets/XC-600156.pdf
>>
>> Gary K8IZ
>>
>> On 3/12/2011 12:31 PM, Brian McCleary wrote:
>>> I'm hoping that's the case with the 706 and it wasn't over-voltaged.
>>>
>>> With the 745 coil issue, any chance of getting some wire and winding one
>>> yourself if you can't find one? Just an idea.
>>>
>>> 73,
>>>
>>> Brian
>>> N3LKA
>>>
>>> -----Original Message-----
>>> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
>> On
>>> Behalf Of icom-request at mailman.qth.net
>>> Sent: Saturday, March 12, 2011 12:01 PM
>>> To: icom at mailman.qth.net
>>> Subject: Icom Digest, Vol 8, Issue 76
>>>
>>> Send Icom mailing list submissions to
>>>        icom at mailman.qth.net
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>        http://mailman.qth.net/mailman/listinfo/icom
>>> or, via email, send a message with subject or body 'help' to
>>>        icom-request at mailman.qth.net
>>>
>>> You can reach the person managing the list at
>>>        icom-owner at mailman.qth.net
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of Icom digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>>      1. Re: IC-706 MKII Issue (w7kna at juno.com)
>>>      2. IC-745 part needed L22 LS266 (Pete Barnes)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Fri, 11 Mar 2011 23:47:37 GMT
>>> From: "w7kna at juno.com"<w7kna at juno.com>
>>> Subject: Re: [ICOM] IC-706 MKII Issue
>>> To: icom at mailman.qth.net
>>> Message-ID:<20110311.164737.24877.0 at webmail21.dca.untd.com>
>>> Content-Type: text/plain; charset=windows-1252
>>>
>>> Probably got that way operating into a high VSWR. Darval w7kna
>>>
>>> ---------- Original Message ----------
>>> From: "Bubba"<n3lka at verizon.net>
>>> To:<icom at mailman.qth.net>
>>> Subject: [ICOM] IC-706 MKII Issue
>>> Date: Thu, 10 Mar 2011 15:11:51 -0500
>>>
>>> Found the issue, and it is related to shorted HF finals. Boy, when these
>>> things go, they really go. I would like to know how they wound up that
>> way,
>>> this was a "Tech Special" from flea bay. Good news is the finals are
>>> available still, bad news is, they're $36 each.
>>>
>>> Thanks,
>>>
>>> Brian
>>>
>>>
>>> Message: 4
>>> Date: Wed, 09 Mar 2011 22:24:33 -0500
>>> From: "Brian M"<n3lka at verizon.net>
>>> Subject: [ICOM] IC-706MKII Blown Cap
>>> To:<icom at mailman.qth.net>
>>> Message-ID:<002801cbded2$adcb2060$1401a8c0 at T60Setup>
>>> Content-Type: text/plain; charset="US-ASCII"
>>>
>>> Hello to everyone on the reflector. I just came across a 706mkii that's
>> not
>>> powering up. I opened it up and looked at the PA section, C82 and Q1 are
>>> blown. My question is do you suspect a reverse polarity, bad finals, or a
>>> just a plain cap failure. I'm hoping it's not a final issue which I still
>>> need to desolder and test.
>>>
>>>
>>>
>>> Just curious if anyone ever had the same failure.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Brian
>>>
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> Icom mailing list
>>> Icom at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/icom
>>>
>>>
>>> End of Icom Digest, Vol 8, Issue 74
>>> ***********************************
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ____________________________________________________________
>>> Groupon&#8482 Official Site
>>> 1 ridiculously huge coupon a day. Get 50-90% off your city&#39;s best!
>>> http://thirdpartyoffers.juno.com/TGL3131/4d7ab4f6b40d5f071fst03duc
>>>
>>> ------------------------------
>>>
>>> Message: 2
>>> Date: Fri, 11 Mar 2011 17:14:58 -0700
>>> From: Pete Barnes<ve6rbp at gmail.com>
>>> Subject: [ICOM] IC-745 part needed L22 LS266
>>> To: Icom at mailman.qth.net
>>> Message-ID:
>>>        <AANLkTikmESf-vTQik022tUBFtK3O81Q=YZYT1yXNptTy at mail.gmail.com>
>>> Content-Type: text/plain; charset=ISO-8859-1
>>>
>>> Hi guys
>>>    I am in need of a small rf transformer L22 for an old IC745
>>> It's on the RF board in the NB circuit.Part# LS-266.Due to
>>> the age Icom says no go.Wihout it the NB is rendered
>>> useless.Any thoughts? I have emailed Scott malcom but the noise
>>> is drivin' me nuts Thanks in advance
>>>
>>> Pete ve6rbp at gmail.com
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> Icom mailing list
>>> Icom at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/icom
>>>
>>>
>>> End of Icom Digest, Vol 8, Issue 76
>>> ***********************************
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>
>> --
>> Gary Fiber K8IZ
>> GROL PG-19-6691 with shipboard radar endorsement
>> Washington State resident
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with shipboard radar endorsement
Washington State resident

More information about the Icom mailing list