[ICOM] 706 and 745

Sat Mar 12 17:39:26 EST 2011

It has ATLAS JAPAN stamped on the can along wih LS266  J4 J4 isprobably a
run #
or date code.I've been all over the net to no avail can't find squat on
atlas.I believe it's about
9.1 mhz from the circuit.I have no parameters on it.I could try to rewind it
but my eyes are crap so there we are.It would be good to find out a cross
reference for these.I used to own an electronic repair shop and remember
this problem before>Some manufacturers used to  put the part # and the
suppliers part # with it but Icom didn't seem to for these.Oh well

thanks guys Pete

these new TV's put out ahelluva racket all over the bands

On Sat, Mar 12, 2011 at 2:22 PM, Gary P. Fiber <gfiber at comcast.net> wrote:

> Maybe one of these will work.
>
> http://www.mouser.com/catalog/specsheets/XC-600156.pdf
>
> Gary K8IZ
>
> On 3/12/2011 12:31 PM, Brian McCleary wrote:
> > I'm hoping that's the case with the 706 and it wasn't over-voltaged.
> >
> > With the 745 coil issue, any chance of getting some wire and winding one
> > yourself if you can't find one? Just an idea.
> >
> > 73,
> >
> > Brian
> > N3LKA
> >
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> On
> > Behalf Of icom-request at mailman.qth.net
> > Sent: Saturday, March 12, 2011 12:01 PM
> > To: icom at mailman.qth.net
> > Subject: Icom Digest, Vol 8, Issue 76
> >
> > Send Icom mailing list submissions to
> >       icom at mailman.qth.net
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >       http://mailman.qth.net/mailman/listinfo/icom
> > or, via email, send a message with subject or body 'help' to
> >       icom-request at mailman.qth.net
> >
> > You can reach the person managing the list at
> >       icom-owner at mailman.qth.net
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Icom digest..."
> >
> >
> > Today's Topics:
> >
> >     1. Re: IC-706 MKII Issue (w7kna at juno.com)
> >     2. IC-745 part needed L22 LS266 (Pete Barnes)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 11 Mar 2011 23:47:37 GMT
> > From: "w7kna at juno.com"<w7kna at juno.com>
> > Subject: Re: [ICOM] IC-706 MKII Issue
> > To: icom at mailman.qth.net
> > Message-ID:<20110311.164737.24877.0 at webmail21.dca.untd.com>
> > Content-Type: text/plain; charset=windows-1252
> >
> > Probably got that way operating into a high VSWR. Darval w7kna
> >
> > ---------- Original Message ----------
> > From: "Bubba"<n3lka at verizon.net>
> > To:<icom at mailman.qth.net>
> > Subject: [ICOM] IC-706 MKII Issue
> > Date: Thu, 10 Mar 2011 15:11:51 -0500
> >
> > Found the issue, and it is related to shorted HF finals. Boy, when these
> > things go, they really go. I would like to know how they wound up that
> way,
> > this was a "Tech Special" from flea bay. Good news is the finals are
> > available still, bad news is, they're $36 each.
> >
> > Thanks,
> >
> > Brian
> >
> >
> > Message: 4
> > Date: Wed, 09 Mar 2011 22:24:33 -0500
> > From: "Brian M"<n3lka at verizon.net>
> > Subject: [ICOM] IC-706MKII Blown Cap
> > To:<icom at mailman.qth.net>
> > Message-ID:<002801cbded2$adcb2060$1401a8c0 at T60Setup>
> > Content-Type: text/plain; charset="US-ASCII"
> >
> > Hello to everyone on the reflector. I just came across a 706mkii that's
> not
> > powering up. I opened it up and looked at the PA section, C82 and Q1 are
> > blown. My question is do you suspect a reverse polarity, bad finals, or a
> > just a plain cap failure. I'm hoping it's not a final issue which I still
> > need to desolder and test.
> >
> >
> >
> > Just curious if anyone ever had the same failure.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Brian
> >
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Icom mailing list
> > Icom at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/icom
> >
> >
> > End of Icom Digest, Vol 8, Issue 74
> > ***********************************
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> > ____________________________________________________________
> > Groupon&#8482 Official Site
> > 1 ridiculously huge coupon a day. Get 50-90% off your city&#39;s best!
> > http://thirdpartyoffers.juno.com/TGL3131/4d7ab4f6b40d5f071fst03duc
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 11 Mar 2011 17:14:58 -0700
> > From: Pete Barnes<ve6rbp at gmail.com>
> > Subject: [ICOM] IC-745 part needed L22 LS266
> > To: Icom at mailman.qth.net
> > Message-ID:
> >       <AANLkTikmESf-vTQik022tUBFtK3O81Q=YZYT1yXNptTy at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > Hi guys
> >   I am in need of a small rf transformer L22 for an old IC745
> > It's on the RF board in the NB circuit.Part# LS-266.Due to
> > the age Icom says no go.Wihout it the NB is rendered
> > useless.Any thoughts? I have emailed Scott malcom but the noise
> > is drivin' me nuts Thanks in advance
> >
> > Pete ve6rbp at gmail.com
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Icom mailing list
> > Icom at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/icom
> >
> >
> > End of Icom Digest, Vol 8, Issue 76
> > ***********************************
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
>
>
> --
> Gary Fiber K8IZ
> GROL PG-19-6691 with shipboard radar endorsement
> Washington State resident
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>