[ICOM] 970H

[Dan Cotsirilos]

Thanks Gary. It appears that the final is a discontinued chip?


Dan K9DTC
----- Original Message ----- 
From: "Gary P. Fiber" <gfiber at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, May 07, 2010 8:11 PM
Subject: Re: [ICOM] 970H


> Sometimes Icom placed the part number on the schematic and not in the
> parts listing. If it was in both but showed a different part number
> between the schematic and parts listing we took the part number on the
> schematic as being correct and it generally was 99% or more of the time
> I don't remember if the finals were descrete or a power brick on the
> IC-970H.
>
> Gary K8IZ
>
> On 5/7/2010 4:55 PM, Dan Cotsirilos wrote:
>> Does anyone know the part number and availability of the 2 meters final 
>> for 970H? I down loaded the service manual but I don't see the finals 
>> listed?
>>
>>
>> Dan K9DTC
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html