[ICOM] 970H

[Gary P. Fiber]

Don't give up yet.... try RF Parts. www.rfparts.com
They many times have RF components the manufacturers do not or a 
suitable replacement.

Gary K8IZ

On 5/8/2010 5:37 AM, Dan Cotsirilos wrote:
> Thanks Gary. It appears that the final is a discontinued chip?
>
>
> Dan K9DTC
> ----- Original Message -----
> From: "Gary P. Fiber"<gfiber at comcast.net>
> To: "ICOM Reflector"<icom at mailman.qth.net>
> Sent: Friday, May 07, 2010 8:11 PM
> Subject: Re: [ICOM] 970H
>
>
>    
>> Sometimes Icom placed the part number on the schematic and not in the
>> parts listing. If it was in both but showed a different part number
>> between the schematic and parts listing we took the part number on the
>> schematic as being correct and it generally was 99% or more of the time
>> I don't remember if the finals were descrete or a power brick on the
>> IC-970H.
>>
>> Gary K8IZ
>>
>> On 5/7/2010 4:55 PM, Dan Cotsirilos wrote:
>>      
>>> Does anyone know the part number and availability of the 2 meters final
>>> for 970H? I down loaded the service manual but I don't see the finals
>>> listed?
>>>
>>>
>>> Dan K9DTC
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>>
>>>        
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>      
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>