[ICOM] IC-207h
W8BVH
w8bvh at sbcglobal.net
Mon Aug 16 11:44:42 EDT 2010
Thanks for the reply Kent. I'm sure that they are straight through but it
just won't work. The length is 16'. I'll double check the cable though.
Ralph Howes
W8BVH
----- Original Message -----
From: "Kent Hufford" <khufford at atlanticbb.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Monday, August 16, 2010 11:38 AM
Subject: Re: [ICOM] IC-207h
>I have not extended a IC-207.
>
> But have used straight thru cables and straight thru connectors for
> IC-880's
> and 2820's.
>
> Works great. BUT, you got to make sure they are STRAIGHT thru.
>
> Kent
> KQ4KK
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of W8BVH
> Sent: Monday, August 16, 2010 11:32 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] IC-207h
>
> I want to extend my microphone so that I can have remote operation from my
> dash. I made up a cat5e cable but the mic won't work. Is there something
> that I am missing?? I thought that a straight through cat5e cable would
> work
>
> just fine. Obviously not. Any help here would be appreciated. A 100.00
> bill
> or so seems too much to extend a microphone.
> Thanks in advance for your help.
> Ralph Howes
> W8BVH
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
More information about the Icom
mailing list